Menu – Sony SDM-HS95B User Manual

Page 19

Advertising
background image

19

GB

Displaying this monitor’s information

While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.

If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS75 or SDM-HS95
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board

Picture is fuzzy

• Adjust the brightness and contrast (page 12).
• Adjust the pitch and phase (page 12).

x Problems caused by a computer or other equipment connected, and not

caused by the monitor

• Set the resolution to 1280

× 1024 on your computer.

Picture is ghosting

• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.

Picture is not centered or sized
properly

• Adjust the pitch and phase (page 12).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to

the edges.

Picture is too small

x Problems caused by a computer or other equipment connected, and not

caused by the monitor

• Set the resolution to 1280

× 1024 on your computer.

Picture is dark

• Adjust the brightness using the BRIGHTNESS menu (page 12).
• Adjust the backlight (page 11).

• Adjust the brightness using the

button (page 10).

• It takes a few minutes for the display to become bright after turning on the monitor.

Wavy or elliptical pattern (moire)
is visible

• Adjust the pitch and phase (page 12).

Color is not uniform

• Adjust the pitch and phase (page 12).

White does not look white

• Adjust the color temperature (page 13).

Monitor buttons do not operate
(

appears on the screen)

• If the menu lock is set to ON, set it to OFF (page 15).

The monitor turns off after a while

x Problems caused by a computer or other equipment connected, and not

caused by the monitor

• Set the computer’s power saving setting to off.

Resolution displayed on the menu
screen is incorrect

• Depending on the graphics board setting, the resolution displayed on the menu screen

may not coincide with the one set on the computer.

Symptom

Check these items

INFORMATION

MODEL : SDM-HS75
SER . NO : 1234567
MANUFACTURED : 2004-52

MENU

Example

Model name

Serial number

Week and year
of manufacture

Advertising
This manual is related to the following products: