Avaya 4075 - Manual (Page 233)

Handset accessories
233
Note: For information about removing the Avaya 4075 DECT
Handset battery compartment cover, see “Removing and installing
the battery pack (4075 only)” (page 227) .
3. Slide in the MEM card from under the two small crescents and press
it, as shown in Figure 26.
4. Ensure that you have inserted the MEM card completely.
Figure 26: Installing the MEM card
Removing the MEM card
To remove the MEM card from the handset, perform the following steps:
1. Place the handset face down on a flat surface.
2. Remove the battery compartment cover and the battery.
3. Slide out the MEM card under the two small crescents, as shown in
Figure 27 .
Memory
card
Handset
Insert