Avaya 4075 - Manual (Page 171)

Telephone settings
171
To define the handset name, perform the following steps:
Resetting the handset
Reset the handset to restore all options to the factory default state. Your
contacts, the handset PIN, and system subscriptions are not impacted by
reset.
To reset the handset, perform the following steps:
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156) .
2. Press the Up or Down key to highlight the Handset
name option.
3. Press the Select soft key.
4. Use the Dialpad to enter or edit the handset name.
Attention: Depending on system configuration
handset name can be used for authentication on
SIP DECT. In this case changing the handset name
will cause authentication failure, so that no calls
can be made or received.
5. Press the Save soft key.
6. Press the Clr key one or more times to return to the
idle display.
1. Open the General settings menu using the steps in
“Accessing the General settings menu” (page 156) .
Handset name
Select
Save