Avaya 4075 - Manual (Page 182)

Telephone settings
182
Enabling the Vibrator
If you enable the Vibrator feature, the handset vibrates to alert you about
incoming calls. You can configure the handset to vibrate, ring, or both.
To enable the Vibrator feature, perform the following steps:
2. Press the Up or Down key to highlight the
Increasing alert option.
3. Press the Select soft key.
4. Press the Up or Down key to select On or Off .
5. Press the Select soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Attention: The Vibrator feature is available on the Avaya 4070 and
4075 DECT Handsets only.
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174) .
Increasing alert
Select
On
Off
Select