Avaya 4075 - Manual (Page 187)

Telephone settings
187
To configure Missed call time on your handset, perform the following
steps:
Configuring Cadence Mode
A cadence defines the duration of the on and off phases of a ringing
cycle. You can use the Tones and Cadences feature on the Avaya
Communication Server 1000 (Avaya CS 1000) system to configure ring
cadences to identify different types of incoming calls. For more
information about Tones and Cadences on Avaya CS 1000, see Avaya
Features and Services Fundamentals
(NN43001-106).
To cause your DECT handset to use the ring cadences configured on
your CS 1000 system, you must activate Cadence Mode on your DECT
handset. This allows the PBX system to control the on and off phases of
1. Open the Sounds and alerts menu using the steps
in “Accessing the Sounds and alerts menu”
(page 174) .
2. Press the Up or Down key to highlight Missed call
time .
3. Press the Select soft key.
4. Use the Dialpad to enter the value in range of 0 to
99.
5. Press the Save soft key to apply the changes.
6. Press the Clr key one or more times to return to the
idle display.
Attention: Cadence Mode is applicable to traditional DECT systems
only (based on DMC cards). If you enable or disable
Cadence Mode for a SIP DECT solution, there is no impact.
Select