Avaya 4075 - Manual (Page 20)

Getting started
20
Figure 2: Installing the battery pack
Installing the charger
To install the charger, perform the following steps:
1. Place the charger on a flat surface.
2. Connect the AC adapter cable to the terminal on the bottom of the
charger.
3. Connect the adapter to an electrical outlet.
4. Place the handset on the charger as shown in Figure 3 .
Note: (4075 only) The Avaya 4075 DECT Handset charger has a slot
that you can use to charge a battery pack without having the battery
pack installed in the phone. See
“Charging the battery pack (4075
only)” (page 229) for more details.
Handset
Battery
pack