Avaya 4075 - Manual (Page 49)

DECT system configuration
49
You can now use the handset to make and receive calls.
Manually selecting the DECT system
If you subscribe the handset to more than one DECT system, you can
manually select which system the handset uses. To manually select a
DECT system, perform the following steps:
10. Use the Dialpad to enter the system name.
11. Press the Save soft key.
The Number prompt appears.
12. Use the Dialpad to enter the phone number
assigned to your handset.
13. Press the Save soft key.
14. Press the Clr key one or more times to return to the
idle display.
1. Open the Connectivity menu using the steps in
“Accessing the Connectivity menu” (page 46) .
2. Press the Up or Down key to highlight the Network
select option.
3. Press the Select soft key.
4. Choose the name of the system from the list.
5. Press the Select soft key.
The name of the currently active system highlights.
6. Press the Clr key one or more times to return to the
idle display.
Save
Save
Network select
Select
Select