Enabling automatic dect system selection – Avaya 4075 User Manual
Page 50
DECT system configuration
50
Enabling automatic DECT system selection
If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
1. Open the
Connectivity
menu using the steps in
“Accessing the Connectivity menu” (page 46)
2. Press the
Up
or
Down
key to highlight the
Network
select
option.
3. Press the
Select
soft key.
4. Highlight
Auto. select
.
5. Press the
Select
soft key.
The name of the currently active system highlights.
6. Press the
Clr
key one or more times to return to the
idle display.
Network select
Select
Auto. select
Select