Steadyshot, Flash mode, Flash level – Sony HDR-XR550V User Manual

Page 81: Redeye reduc (redeye reduction)

Advertising
background image

1

Cust
omizing y

our camc

or

der

US

STEADYSHOT

You can compensate for camera shake.

Set [ STEADYSHOT] to [OFF] (

)

when using a tripod (sold separately), then

the image becomes natural.

 ON

The SteadyShot function is used.

OFF (

)

The SteadyShot function is not used.

FLASH MODE

You can select the flash setting when you

record photos using the built-in flash, or

an external flash (sold separately) that is

compatible with your camcorder.

 AUTO

Automatically flashes when there is

insufficient ambient light.

ON ( )

Always uses the flash regardless of the

surrounding brightness.

OFF ( )

Records without flash.

Notes

The recommended distance to the subject when

using the built-in flash is approximately 0.3 to

1.5 m (11 7/8 to 59 1/8 in.).

Remove any dust from the surface of the flash

before using it. Flash effect may be impaired if

heat discoloration or dust obscures the lamp.

The /CHG (flash/charge) lamp (p. 12) flickers

while charging the flash, and remains lit when

the battery charge is complete.

If you use the flash in bright places such as

when shooting a backlit subject, the flash may

not be effective.

The built-in flash is not flashed when

[CONVERSION LENS] (p. 77) is set to other

than [OFF], you cannot also set [FLASH

MODE].

The built-in flash is not flashed in movie

recording mode.

FLASH LEVEL

You can set this function when you

record photos using the built-in flash, or

an external flash (sold separately) that is

compatible with your camcorder.

HIGH ( )

Makes the flash level higher.

 NORMAL ( )

LOW ( )

Makes the flash level lower.

REDEYE REDUC (Redeye
reduction)

You can set this function when you

record photos using the built-in flash, or

an external flash (sold separately) that is

compatible with your camcorder.

When you set [REDEYE REDUC] to [ON],

then set [FLASH MODE] to [AUTO] or

[ON], appears. You can prevent redeye

by activating the pre-flash before the flash

flashes.

 OFF

Does not prevent redeye.

ON ( )

Prevents redeye.

Notes

The redeye reduction may not produce the

desired effect due to individual differences and

other conditions.

The redeye function does not work with

automatic recording by [SMILE DETECTION].

Advertising
This manual is related to the following products: