Sony SDM-P232 - Manual (Page 8)

8
2 Using the supplied HD15-HD15 video signal cable
(analog RGB), connect the computer to the
monitor’s HD15 input connector (analog RGB) for
INPUT1 or INPUT2.
Connect the computer according to the following
illustrations.
x Connecting to an IBM PC/AT or
compatible computer
x Connecting to a Macintosh
* When connecting a Macintosh computer, use an adapter (not
supplied), if necessary. Connect the adapter to the computer before
connecting the video signal cable.
Setup 3: Connect the power cord
1 Connect the supplied power cord to the monitor’s
AC IN connector.
2 Connect it to a power outlet.
IBM PC/AT or
compatible computer
HD15-HD15 video signal
cable (analog RGB)
(supplied)
to the computer’s HD15 output
connector (analog RGB)
to the HD15 input
connector (analog RGB)
for INPUT1 or INPUT2
Macintosh
to the computer’s
output connector
*
HD15-HD15 video
signal cable (analog
RGB) (supplied)
to the HD15 input
connector (analog RGB)
for INPUT1 or INPUT2
to power outlet
power cord (supplied)
2
1
to AC IN