Sony STR-DE997 - Manual (Page 45)

O
ther O
p
e
ratio
ns
masterpage:Right
lename[C:\Documents and
Settings\pc13\Desktop\J9031715_4255361111DE997U\4255361111\GB070TH_STR-DE997-
U.fm]
45 US
model name1[STR-DE997]
[4-255-361-11(1)]
If, however, you have a Sony CD changer with
VIDEO OUT jacks, set the command mode to
“CD 2” and connect the changer to the VIDEO
2 jacks on the amplifier (receiver).
Connections
You can connect up to 10 CONTROL A1II
compatible components in any order. However,
you can connect only one of each type of
component (i.e., 1 CD player, 1 MD deck, 1 tape
deck and 1 receiver).
(You may be able to connect more than one CD
player or MD deck, depending on the model.
Refer to the operating instructions supplied with
the respective component for details.)
Example
In the CONTROL A1II control system, the
control signals flow both ways, so there is no
distinction of IN and OUT jacks. If a component
has more than one CONTROL A1II jack, you
can use either one, or connect different
components to each jack.
Some CONTROL A1 compatible components
are supplied with a connecting cord as an
accessory. In this case, use the connecting cord
for your connection.
When using a commercially available cord, use
a monaural mini-plug cord less than 2 meters
long, with no resistance.
Basic Functions
The input selector on the receiver automatically
switches to the correct input when you press the
play button on one of the connected components
(Auto input selection).
The CONTROL A1II functions will operate as
long as the component you want to operate is
turned on, even if all of the other connected
components are not turned on.
Note
When recording, do not play any components other
than the recording source. It will cause the automatic
input selection to operate.
Using CONTROL S Control
System
If you have a CONTROL S-compatible Sony
TV, satellite tuner, monitor, DVD player or
VCR, use a monaural mini-plug cord (not
supplied) to connect the CONTROL S IN (for
TV, satellite tuner, or monitor) or CONTROL S
OUT (for VCR, etc.) jack on the receiver to the
appropriate CONTROL S jack on the respective
component. Refer to the operating instructions
supplied with your TV, satellite tuner, monitor,
VCR, etc., for details.
If you connect the CONTROL S OUT jack on
another component to the CONTROL S IN
jack on this unit
Example
The remote sensor on the CONTROL S OUT
component receives remote codes the same way
as the remote sensor on this unit. This is useful
if you have placed this unit in a rack, etc.
CD
player MD
deck Tape
deck Other
components Amplifier
(Reciever)
OUT
IN
N X
m M
. >
-
x
O f
F G g
TV, VCR,
tuner,
monitor,
etc.
Receiver
Remote
continued
GB01COV_STR-DE997-U.book Page 45 Friday, April 2, 2004 11:00 AM