Sony DSC-T7 - Manual (Page 30)

30
For details on the operation
t
page 26
You can change the focus method. Use the menu when it is difficult to get the proper focus in
auto focus mode.
• AF stands for Auto Focus.
• Distance setting information in [Focus] is approximate. If you point the lens up or down, the error
increases.
• The distance selection is limited according to the Scene mode (page 25).
• When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount
of vibration.
9 (Focus)
(unlimited distance) Focuses on the subject using a previously set distance to the
subject. (Focus preset)
• When shooting a subject through a net or through window glass,
it is difficult to get the proper focus in auto focus mode. In these
cases, use of [Focus] is convenient.
7.0m
3.0m
1.0m
0.5m
Spot AF ( ) Focuses automatically on an extremely small subject or a
narrow area.
• This is useful when focusing on an extremely small subject or a
narrow area. Use together with the AF lock function lets you
shoot in the desired image composition. Take care to hold the
camera steady so that the subject does not deviate from the
range finder frame.
Center AF
(
)
Focuses automatically on a subject near the center of the
frame.
• Using this with the AF lock function lets you shoot in the
desired image composition.
Multi AF
(Multipoint AF)
(Still image
)
(Movie )
Focuses automatically on a subject in all ranges of the finder
frame.
• This mode is useful when the subject is not in the center of the
frame.
VGA
FINE
98 P
S AF
60min 101
AF range finder frame
AF range finder frame
indicator
VGA
FINE
98 P
S AF
60min 101
AF range finder frame
AF range finder frame
indicator