Sony DSC-T50 - Manual (Page 70)

70
For details on the operation 1 page 58 Setup 4
4
Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
The × mark moves on the screen.
If you fail to press the right spot, the calibration is not performed. Press the × mark again.
Calibration
Calibration
Touch the "X"
Cancel
1/3