Sony DSC-D770 - Manual (Page 82)

82 GB
Adv
anced Operations
T
aking a Picture
4
Press the EXECUTE button.
The WB FLASH menu is displayed.
5
Select “Flash Mode” using the 4(UP)/$(DOWN)
buttons and press the EXECUTE button.
WB FLASH
Internal Flash Mode /External
Interval 10 sec(3~10)
Start
You can now set the flash mode.
6
Choose “Internal” (built-in flash) or “External”
(external flash) using the 4(UP)/$(DOWN)
buttons and press the EXECUTE button.
Choose “Internal” to use the built-in flash or
“External” to use the external flash and press the
EXECUTE button.
7
If you chose “External” in step 6, select “Interval”
using the 4(UP)/$(DOWN) buttons and press the
EXECUTE button.
You can choose the interval during which to have
the flash light.
Set an interval within the range of 3 to 10 seconds
(in one-second units) using the 4(UP)/$(DOWN)
buttons and press the EXECUTE button.
Note
When using an external flash, set the amount of
light for the flash before adjusting the white
balance to avoid extreme brightness or darkness
in your pictures.
8
Point the camera toward a completely white
subject until it completely fills the viewfinder.