Sony STR-SL7 - Manual (Page 14)

14
Multi channel surround setup
(continued)
Specifying the speaker
parameters
1
Press SET UP.
2
Press the cursor buttons ( U or u) to
select the parameter you want to
adjust.
3
Press + or – to select the setting you
want.
The setting is stored automatically.
4
Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
L R
(FRONT) LARGE
C (CENTER) LARGE
SL SR (SURR) LARGE
SW
(SUB WOOFER) S.W. YES
L R (FRONT) XX.X m DIST. 16 feet
C (CENTER) XX.X m DIST. 16 feet
SL SR (SURR) XX.X m DIST. 11 feet
SL SR (SURR) PL. XXX PL. BEHD.
SL SR (SURR) HGT. XXX HGT. LOW
Tips for the speaker settings
When you use micro satellite speaker system, you can
easily adjust the settings for the speaker size and sub
woofer selection. Turn off the power, then turn on
again while pressing the cursor button
U. “MICRO
SP.” appears in the display and the speaker size and
the sub woofer selection are fixed to the following
settings.
Speakers Settings
Front SMALL
Center SMALL
Surround SMALL
Sub woofer S.W. YES
You cannot change the configuration if you choose
MICRO SP.
To reset to the normal settings, turn off the power,
then turn on again while pressing the cursor button
U.
x Front speaker size (
L R
)
• If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
• When the front speakers are set to “SMALL”,
the center and surround speakers are also
automatically set to “SMALL” (unless
previously set to “NO”).
x Center speaker size (
C
)
• If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. However, if the front speakers are
set to “SMALL”, you cannot set the center
speaker to “LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.*
1
• If you do not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers.*
2