Sony ERS-7M3 User Manual
Page 14
Ne
tw
ork Configuration
14
4
Remove the AIBO MIND 3 software “Memory Stick™”
media from the reader/writer. Insert it into the AIBO
®
Entertainment Robot, and press the pause button on the
AIBO robot’s back to activate the AIBO robot.
For instructions on inserting the “Memory Stick” media, refer to
the “User’s Guide (Basic)”.
5
Once your AIBO robot is activated, go to the “AIBO Search” tab in the “AIBO WLAN Manager 3” dialog
box, and click Search.
An icon appears if the AIBO robot is on the same network as your PC.
An icon will appear only if the “Enable SSDP” check box was selected.
Pause button
AIBO MIND 3
software
“Memory Stick”
media
When you click an AIBO icon in the list above, information for that
AIBO robot is displayed.
When you click the URL shown, the top page of the “AIBO MIND 3”
Web site is opened.
After clicking “Search”, the AIBO robots using the same network
as the PC are shown.
Click this button.
z
Hints
•
If the AIBO icon does not appear even after clicking the “Search”
button, then the PC cannot communicate with the AIBO robot
wirelessly. Confirm the settings on the “Easy” and “Advanced”
tabs. Also, check that the wireless switch (page 7) on the AIBO
robot’s body is set to ON.
•
Windows
®
XP operating system users must install Universal Plug
and Play (UPnP) in order to use the AIBO search function. For the
installation procedure, refer to page 9.
•
You can confirm the IP address in Clinic Mode. See “Confirming the