Sony DVP-NS90V User Manual

Page 49

Advertising
background image

D:\SONY DVD\2634583121 DVP-
NS90V_US\SOURCE\DVP-
NS90V_US\01US09ADV1-CEK.fm

master page=right

49

Sou

nd Adj

u

st

m

e

n

ts

DVP-NS90V

2-634-583-11(1)

VIRTUAL MULTI DIMENSION
Creates an array of virtual rear speaker
positions higher than the listener from a
single set of actual rear speakers.
This mode creates five sets of virtual speakers
surrounding the listener at approximately a
30

°

angle of elevation. The effect differs

according to “REAR” or “SIDE” setting of
the rear speakers (page 75).

Notes

• When you select one of the surround modes, turn

off the surround setting of the connected TV or
amplifier (receiver).

• Not all discs will respond to the “TVS NIGHT”

function in the same way.

• To enjoy the multichannel audio through the

5.1CH OUTPUT jacks, correctly set each speaker
position and distance (page 22, 75).

• When the playing signal does not contain a signal

for the rear speakers, you cannot hear the TVS
effect.

• When you select one of the TVS modes, the

player does not output the sound of center
speaker.

• Make sure that your listening position is between

and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.

• If you use the DIGITAL OUT (OPTICAL or

COAXIAL)/HDMI OUT jack and set “DOLBY
DIGITAL” to “DOLBY DIGITAL,” and “DTS”
to “DTS,” in “AUDIO SETUP”, sound will come
from your speakers but it will not have the
SURROUND effect.

• The surround effects do not work when using the

Fast Play or Slow Play functions, even though you
can change the surround modes.

L: Front speaker (left)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)

: Virtual speaker

LS

RS

L

R

L

R

LS

RS

REAR

SIDE

Advertising