Sony KDL-47W802A - Manual (Page 33)

i-Manual
Print Font Size
Basic Operations
Parts Description
Watching TV
Using Other Devices
Using “BRAVIA” Sync
Devices
Useful Functions
Using Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
Top Page > Parts Description > Front
Front
Sensors and Illumination
Remote control sensor
Receives signals from the remote control.
Point the remote control at the Sony logo to operate the TV.
Do not place anything near the sensor. Doing so may affect its function.
Light sensor
Senses room light level and adjusts the screen brightness accordingly.
Do not place anything near the sensor. Doing so may affect its function.
Illumination LED
Illumination lights up or blinks in response remote control operations, lights up in different colors
according to the status of the TV.
Blinking
(Blinking speed depends on status)
TV is turned on
TV is receiving an incoming call *2
TV is in Picture off mode
Software update is in progress
Blinking
When the TV and mobile device (e.g. smartphone) are connected wirelessly
*1
During recording (including SCART REC) or TV is in pause mode *2
*1
The following Timer functions are set:
On Timer, Sleep Timer, Reminder (*2), REC Timer (*2), Picture Frame
For simultaneous conditions, the upper condition in the table has priority over others.
Illumination does not light when the TV is in standby mode, except when recording is in progress or
33