Step 4: connecting the audio cords, Select a connection – Sony DVP-NS325 User Manual
Page 17
17
H
ook
up
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 41),
TVS WIDE (page 41)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 41)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 41).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 62)
(page 20)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 62)
– DTS (5.1ch) (page 62)
A
D
A
B
C
D
,
continued