Massmultiples Multiple viewing system C2 dual format - Manual (Page 2)

W A R R A N T Y
FCC INFORMATION
FCC WARNINGS:
This equipment has been tested and found to comply with the limits for a Class B digital devices,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help.
Ensure the area around the monitor is clean and free of moisture
Changes or modifications not expressly approved by MASS INC. could void the user's
authority to operate the equipment.
FOR YOUR RECORDS
The serial number of this product is on the
back of the monitor. Write the serial number
of this unit in the space below and keep this
booklet as a permanent record of your
purchase to aid in identification in the event of
theft or loss.
Product Name: DUAL FORMAT M.V.S.
Model: C2H15D
Serial Number(s):
Purchase Date:
CUSTOMER SUPPORT
MASS Engineered Design Inc. can be
reached in the following ways:
474 Wellington Street West, Toronto,
Ontario, Canada M5V 1E3
Email: [email protected]
Web: www.massmultiples.com
www.massedi.com
Phone: (416) 593-4663
Fax: (416) 593-5262
1 • 8 8 8 • 6 0 3 • 9 8 5 8
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN ENCLOSURE
CAUTION: To prevent electric shock, do
not remove cover. No user-servicable
parts inside. Refer servicing to qualified
service person. For home and office use.
WARNING
Handling the cord of this product will expose you to lead, a chemical to the State of California
to cause [cancer, and] birth defects or other reproductive harm. Wash hands after handling.
APPROVALS
US
C
O N S C R E E N D I S P L A Y M E N U
LIMITED WARRANTY
Definitions.
i. "We", "us" and/or "our" means MASS
Engineered Design Inc. ("MASS").
ii. "You" or "your" or "purchaser" means
the individual or entity named on the
invoice.
MASS Engineered Design Inc. warrants to
t h e o r i g i n a l c o n s u m e r p u r c h a s e r
("purchaser") of this product that the MASS
product purchased shall be free from defects
in materials and workmanship for a period of
3 years of normal use. This warranty does not
cover any incom-patibilities due to the
purchaser's computer, hardware, software or
any other config-uration in which the product
interfaces. If a defect covered by this limited
warranty occurs, MASS, at its option, will
repair or replace the defective MASS product
free of charge.
MASS reserves the right to replace any
defective MASS product with product of
equivalent or superior performance. Such
r e p l a c e m e n t p r o d u c t m a y b e
remanufactured product or manufactured
using remanufactured components at MASS'
option. Repaired or replaced product will be
covered by the same warranty.
This 3-year warranty does not apply to
defects caused by abuse, misuse,
n e g l i g e n c e , a c c i d e n t , t a m p e r i n g ,
modification or other causes not related to
defective materials or workmanship. MASS
reserves the right to impose a reasonable
charge for the repair of products returned with
defects resulting from any of the above
causes and for returns where the product is
found to be in good working condition.
Return Policy. To return merchandise, you
must obtain an RMA number. Please call the
MASS customer service department and
provide the invoice number, item description,
and serial number(s) of the merchandise you
wish to return. Returned merchandise must
be placed in original packaging, and may
include product manuals and other
accessories. No MASS product will be
accepted for repair without a RMA number.
For any returned merchandise we will be
responsible for shipping cost incurred on the
first 30-days. After 30-days MASS will only be
responsible for shipment costs to return the
merchandise to the purchaser. Any additional
shipping costs incurred after 90-days of
original purchase date will be the sole
responsibility of the purchaser.
No other warranties are expressed or
implied, including but not limited to, any
implied warranties of merchantability or
fitness for a particular purpose. In no event
shall MASS be liable for consequential or
incidental damages resulting from the use or
installation of any MASS product, or the
breach of any express or implied warranties.
MASS' liability to purchaser with respect to
any claim or loss arising out of this
transaction or alleged to have resulted from
an act or omission of MASS shall be limited to
purchasers' cost of the MASS product.
LIMITATION OF IMPLIED WARRANTIES
EXCLUSION OF DAMAGES
There are no warranties, express or implied, which extend beyond the description contained
herein including the implied warranty of merchantability and fitness for a particular purpose.
MASS Engineered Design Inc.’s liability is limited to the cost of repair or replacement of the
product. MASS Engineered Design Inc. shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
For MASS Inc. products sold outside North America, contact your MASS Engineered Design Inc.
Dealer warranty information and service.
Some states do not allow the exclusion of consequential or incidental damages, so the above
exclusion may not apply to you. This warranty provides you with specific legal rights. You may
have other rights that vary from state to state.
IBM XT, AT, 386, 486 and PS/2 are registered trademarks and/or trademarks of International
Business Machines Corporation
Windows is a registered trademark of Microsoft Corporation
Pentium is a trademark of Intel Corporation
Macintosh and Power Macintosh are registered trademarks of Apple Computer Inc.
VESA is a registered trademark of Video Electronics Standards Association. DPMS and DDC are
trademarks of VESA.
© 2003-2005 MASS Engineered Design Inc. reserves the right to change product specification
and documentation without notice. MASS shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product. This document may not copied,
reproduced or transmitted by any means in whole in part, for any purpose without the express
written permission of MASS EDI. All rights reserved. All MASS Multiples™ product are protected
by US Patents: RE. 36,978 | 5,687,939 | US 6,343,006 B1 | 2384 611
BRIGHTNESS
BLACK LEVEL
COLOR
IMAGE
AUTO CONFIG
INFORMATION
MISCELLANEOUS
VIDEO
YUV COLOR
INPUT SELECT
SAVE
:: function not available
:: function not available
:: S-Video, Analog, Digital and Video functions
may not be available depending of model.
:: Adjusts; Hue, Saturation, H-Position
and V-Position
:: adjusts brightness level
:: adjusts black level
:: adjusts contrast level
:: function not available
:: displays LCD system configuration
:: Selects: Factory Reset, OSD Timeout,
OSD Position, Dithering & Native Mode
:: Saves LCD settings
:: Adjusts; brightness, black level, con-
trast, saturation, hue and flesh tone
:: automatic configuration
IMAGE POSITION
CONTRAST
Brightness
1 : Exit 2 : Select
Brightness currently
selected, displayed as
active.
Black Level
Contrast
Color (n/a)
Image
Position (n/a)
Main Menu OSD
Image (n/a)
Auto Config
Information
Brightness
1 : Exit
10
Black Level
1 : Exit
10
Input
Select
Miscellaneous
Save Settings
Contrast
1 : Exit
10
1 : Exit
NO YES
Auto Config
1 : Exit
720 x 240
V. 60.0 / H. 17.7
Information
1 : Exit
NO YES
Save Settings
1 : Exit
NO YES
Factory Reset
1 : Exit
ON
Dithering
1 : Exit
20
OSD Timeout
1 : Exit 2 : Select
H-Position
V-Position
OSD Position
1 : Exit
ON
Native Mode
Use the Directional Select to make adjustments.
Use the Directional Select to make adjustments.
Use the Directional Select to make adjustments.
Use the Directional Select to choose either YES or NO.
Displays screen information.
Use the Directional Select to choose either YES or NO.
Use the Directional Select to choose either YES or NO.
Use the Directional Select to choose either ON or OFF .
Use the Directional Select to adjust preset number.
Use the Directional Select to choose either horizontal or vertical.
Use the Directional Select to choose either ON or OFF .
YUV Colour
Video