Sony KDL-32EX600 - Manual (Page 8)

8
Locating Inputs and Outputs
Item Description
1 AC IN Connect the supplied power cord to AC IN and the nearest wall outlet.
2 DIGITAL AUDIO
OUT (OPTICAL) Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
Digital compatible.
3 CABLE/
ANTENNA RF input that connects to your Cable or VHF/UHF antenna.
4 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L Component video provides better picture quality than the composite video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
5 VIDEO IN 1/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L
(MONO) This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y for video and use audio L (mono) and R for audio signal. For component
connection, use Y, P
B
, P
R
for video signals and also connect the audio L (mono)
and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU, select Settings, and then select the Setup
settings. Select the Video/Component 1 Selection option then set to Auto.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
VIDEO IN
VIDEO
AUDIO
L
R
(MONO)
2
2
3
IN
9
0
8
1
2
1
1
AUDIO
R L
R L
COMPONENT IN
PC IN
AUDIO OUT
(FIX)
P R P B Y
VIDEO IN
AUDIO RGB
PC/HDMI 1
AUDIO IN
(MONO)
4
IN
AUDIO
AUDIO
R L
(1080p/1080i/
720p/480p/480i)
CABLE/
ANTENNA
DIGITAL
AUDIO OUT
(OPTICAL)
AC IN
2 3 4 5 6
7 8 1
Side Panel Rear Panel