Sony VPL-DW125 - Manual (Page 10)

10
Connecting the Projector
INPUT B
• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
USB connector (Type A) ( )
For connecting a USB memory device (“Using USB Media Viewer” (page 36)).
USB connector (Type A) ( )
For connecting a USB wireless LAN module IFU-WLM3 (supplied) (“Presentation Function
via Network” (page 32)).
• Undesignated USB wireless LAN modules do not work.
• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in
Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.
Notes
Connecting a USB memory device
Connecting a USB wireless LAN module
Notes
Video equipment
HDMI cable
(not supplied)
HDMI output
connector
For connecting video equipment with an HDMI output connector.
USB memory device
(not supplied)
USB wireless LAN module
IFU-WLM3 (supplied)