Sony VPL-DW125 - Manual (Page 33)

33
Using Presentation Function via Network
P
re
s
en
ta
tio
n
Fun
c
tion vi
a N
e
tw
or
k
After starting Projector Station for Network
Presentation, the connection setting window
appears.
1
Find projectors connected to the
network.
Click “Search” in the connection setting
window to search for projectors.
• The appearance of the application on the
screen is subject to change without notice.
• When a projector is connected to a network
via a wireless connection, if the “SSID” is
changed from the factory default, it may not
be found.
• When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
• When connecting a projector with its
“SSID”, “Security Method” and “Wireless
Password” in the “Wireless LAN Setting”
changed, select “Manual Connect” and
connect manually.
2
Select a projector to project an image.
Check the checkbox.
3
Click “Connect”.
If other users are projecting an image,
the controller appears on the screen.
Click the
to start projecting an
image (page 34).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Display related settings (such as your
computer’s resolution) change when the
application is started.
Projecting an Image
Notes
Note
Connection Settings
Item Item descriptions
Wireless LAN
Adapter To select a wireless LAN
adapter used for Projector
Station for Network
Presentation (appears only
when wireless connection is
used).
Connection
History List profiles that have been
connected before.
Search Results Show the search result.
Profile Name Display the registered names
of the projectors found in the
network.
Connection Display the connection
method (wired/wireless).
Displays the strength of the
wireless signal (appears only
when wireless connection is
used).
SSID Display SSID (appears only
when wireless connection is
used).
IP Address Display IP address (appears
only when wired connection
is used).
Search Start searching for projectors
in the network.
Delete Delete selected profile.
Property Display the properties of the
selected profile.
Connect Connect to the selected
projector and start projecting
an image.
Manual
Connect Enter the SSID and IP
address manually to connect
with the projector, and start
projecting an image.