Error displays/messages – Sony MEX-1GP User Manual

Page 19

Advertising
background image

19

Error displays/Messages

*1 If an error occurs during playback of a CD or MD,

the disc number of the CD or MD does not appear
in the display.

*2 The disc number of the disc causing the error

appears in the display.

If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-ON” or
“MONO-OFF” (FM), or “LOCAL-OFF” (AM)
appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.

BLANK*

1

Tracks have not been recorded on the MD.

*

2

t Play an MD with recorded tracks.

ERROR*

1

• The disc is dirty or inserted upside down.

*

2

t Clean or insert the disc correctly.

• A blank disc has been inserted.
• The disc cannot play because of some problem.

t Insert another disc.

FAILURE (Illuminates until any button is pressed.)

The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to

check the connection.

FAILURE (Illuminates for about 1 second.)

When the XM tuner is connected, storing an XM radio
channel into a preset failed.
t Be sure to receive the channel that you want to

store, then try it again.

FAT-ERROR

There is a problem with the file system of the flash
memory.
t Format the flash memory (page 20). If the problem

persists, consult your nearest Sony dealer.

FS ERROR

A file system other than EzRecover is being used for
the flash memory.
t Format the flash memory (page 20).

LOAD

The changer is loading the disc.
t Wait until loading is complete.

L. SEEK +/–

The local seek mode is on during automatic tuning.

NO DISC

The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.

NO ID3

ID3 tag information is not written in the MP3 file.

NO INFO

Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.

NO MAG

The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.

NO MUSIC

• The disc is not a music file.

t Insert a music CD in this unit or MP3 playable

changer.

• There are no music files in the flash memory.

t Transfer music files from your computer.

NO NAME

A track/album/group/disc name is not written in the
track.

NOT READ

The disc information has not been read by the unit.
t Load the disc, then select it on the list.

NOTREADY

The lid of the MD changer is open or the MDs are not
inserted properly.
t Close the lid or insert the MDs properly.

OFFSET

There may be an internal malfunction.
t Check the connection. If the error indication

remains on in the display, consult your nearest
Sony dealer.

READ

The unit is reading all track and album/group
information on the disc/flash memory.
t Wait until reading is complete and playback starts

automatically. Depending on the disc/flash memory
structure, it may take more than a minute.

RESET

The CD unit and CD/MD changer cannot be operated
because of some problem.
t Press the RESET button (page 4).

” or “

During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.

The character cannot be displayed with the unit.

Advertising