Sony DCR-SR87 - Manual (Page 90)

90
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 16).
C:13:  / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E:20:  / E:31: / E:61: / E:62: /
E:91:  / E:94:
A malfunction that you cannot service has
occurred. Contact your Sony dealer or local
authorized Sony service facility. Inform them
of the 5-digit code, which starts from “E.”
101-0001 (Warning indicator pertaining
to files)
Slow flashing
The file is damaged.
The file is unreadable.
(Warning on the hard disk of the
camcorder)
Fast flashing
The hard disk of the camcorder is full.
An error may have occurred with the hard
disk drive in your camcorder.
 (Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions,  may flash, even if there
are about 20 minutes remaining.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.











(Low temperature warning)
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
(Warning indicator pertaining to
“Memory Stick PRO Duo” media)
Slow flashing
Free spaces for recording images are running
out. For the type of “Memory Stick” media you
can use with your camcorder, see page 59.
No “Memory Stick PRO Duo” media is
inserted (p. 60).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 53, see Operating Guide too), delete
unnecessary images, or format the “Memory
Stick PRO Duo” media (p. 62).
The image data base file may be damaged.
Check the data base file by touching
(HOME)  (MANAGE MEDIA) 
[REPAIR IMG.DB F.]  the recording
medium.
The “Memory Stick PRO Duo” media is
damaged.
(Warning indicators pertaining
to “Memory Stick PRO Duo” media
formatting)
The “Memory Stick PRO Duo” media is
damaged.
The “Memory Stick PRO Duo” media is not
formatted correctly (p. 62).
(Warning indicator pertaining to
incompatible “Memory Stick Duo” media)
Incompatible “Memory Stick Duo” media are
inserted (p. 59).
 (Warning indicator pertaining to
the write-protect of the “Memory Stick
PRO Duo” media)
Access to the “Memory Stick PRO Duo” media
was restricted on another device.









