Sony PCG-NV190P - Manual (Page 79)

To connect a projector
1. Turn off the computer before you connect the projector.
2. Locate the VGA (Monitor) port and the Headphone jack on the computer.
3. Plug one end of the display cable (not supplied) into the VGA port, and plug the opposite end into the
appropriate port on the projector.
4. Plug one end of the audio cable (not supplied) into the Headphone jack, and plug the opposite end into the
appropriate port on the projector.
5. Verify that the power cord is plugged into the projector and an AC outlet.
6. Turn on all external devices before you turn on the computer.
Connecting a Projector
See the manual that came with your projector for more information on its installation and use.
Page 79