Sony HT-CT770 - Manual (Page 25)

25 US
Miscellaneou
s
The supplied remote control can control the system and the
connected devices. Some devices may not be controlled by it. In
such a case, use the remote control of the device.
Operate the remote control by aiming it at the remote control sensor of
the Bar Speaker.
Operation of the system
 INPUT button
  (on/standby) button
 DISPLAY button
To switch the brightness (Bright/Dark/Off) of the display of the
Bar Speaker.
 When the display brightness is set to “Off,” the display is
turned off after the display shows operation status for several
seconds.
 When switched from “Off” to “Bright,” the display shows the
audio stream information.
 SW VOL (subwoofer volume) +/ buttons
 SOUND FIELD buttons*
1
 NIGHT (night mode) button* 1
 MUTING button
 VOL (volume) +*
2 /  buttons
 AMP MENU button
 PAIRING button
 RETURN button
  (return)/  (select)/ (proceed)/ (enter) buttons
Press the , , , or  button to select a setting then press the
button to register the setting.
 VOICE button* 1
Operation of the TV
 TV CH (channel) +/ buttons
To change the channel.
 TV INPUT button
To switch the input in the TV.
 TV  (on/standby) button
To turn on and off a TV that can be controlled by the remote
control of the system.
Remote control
Note
continued