Sony PEG-UX50 - Manual (Page 18)

18
Sony Personal Entertainment Organizer PEG-UX50/UX40 US 4-676-076-11 (1)
B If you set the IR port to search automatically for the target IR devices on
your computer, follow the procedure below to reset the IR port setting.
1 Click [Start], select [Settings] (except for Windows XP), and click
[Control Panel].
2 Double-click the Infrared icon (the Wireless Link icon in Windows
2000 Professional/Windows XP).
3 Click [Sending image].
4 Deselect [Send the image from the digital camera to your computer
using the wireless link] and click [OK].
5 Click (HotSync) in the task tray at the bottom right of your
computer window and select [InfraRed] from the shortcut menu.
An error message indicating insufficient memory appears
while receiving data using the IR port or the Bluetooth
®
communication
B To receive data using the IR port or the Bluetooth
®
communication, the free
space of your CLIÉ handheld’s memory must be more than twice the size of
data to be received. If there is insufficient memory space in your CLIÉ
handheld, delete any unnecessary data (after backing up any of that data you
might need in the future) and try receiving data again.
B Perform a soft reset by pressing the RESET button.
b For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting
your CLIÉ™ handheld” in the supplied “Read This First (Operating
Instructions)”.
The HotSync
®
operation does not start and a message
appears on the screen