Starting up “pmb portable” (windows) – Sony DSC-W570 User Manual
Page 169
Top page > Using with your computer > Uploading images to a media service > Starting up
“PMB Portable” (Windows)
Starting up “PMB Portable” (Windows)
For Windows, when using “PMB Portable” for the first time, you must select the language. Follow
the procedure below to make the selection. Once the language selection has been made, steps
3 to 5 are unnecessary the next time you use “PMB Portable”.
1. Make a USB connection between the camera and a computer.
When you connect the camera and your computer, the AutoPlay Wizard appears.
Click [×] to close any unnecessary drives.
If the desired AutoPlay Wizard does not appear, click [Computer] (in Windows XP, [My
Computer])
[PMBPORTABLE], then double-click [PMBP_Win.exe].
2. Click [PMB Portable].
(In Windows XP, click [PMB Portable]
[OK].)
If [PMB Portable] is not displayed within the AutoPlay Wizard, click [Computer]
[PMBPORTABLE], then double-click [PMBP_Win.exe].
The Language Selection screen appears.
3. Select the desired language, then click [OK].
The Region Selection screen appears.
4. Select the appropriate [Region] and [Country/Area], and then click [OK].
The User Agreement screen appears.
5. Read the agreement carefully. If you accept the terms of the agreement, click [I Agree].
“PMB Portable” starts up.
Notes
Set [LUN Setting] in [Main Settings] to [Multi].
Always connect to a network when using “PMB Portable”.
When uploading images over the Internet, the cache may remain in the computer being
used depending on the service provider. This is also true when this camera is used for this
purpose.
When a bug occurs in “PMB Portable” or you delete “PMB Portable” by mistake, you can
repair “PMB Portable” by downloading the PMB Portable installer from the website.
Copyright 2010 Sony Corporation
169