Sony DSC-RX100M2 User Manual

Page 2

Advertising
background image

Sending images to a smartphone (One-touch sharing (NFC))

You can monitor the image to be captured and shoot with your smartphone.
Select MENU  1  [Ctrl with Smartphone] on the camera in step 2 to set
up the camera, or touch the N mark of the smartphone to

(N Mark) at the

bottom of the camera.
Communication distance: Approx. 10m/33ft (line-of-sight)
Note: Communication distance may vary, depending on your surroundings/
smartphone.

For details on operations, refer to the Wi-Fi Guide.

http://support.d-imaging.sony.co.jp/wi-fi/dsc/2013-2/

1 Install the latest version of PlayMemories Mobile on your smartphone.

Note: For more information, refer to the following website.

http://www.sony.net/pmm/

2 Select an image on the camera to be sent and connect a smartphone to the camera.

Note: Movies recorded in AVCHD format cannot be sent to a smartphone.

3 Images on the camera will be sent to your

smartphone.

Note: The sent image is stored in Gallery of Android, or Album of iOS.

Using a smartphone as a remote controller (One-touch remote (NFC))

Android 2.3 ~

iOS 4.3 ~

 Playback an image to be sent to the smartphone.

 Select [Settings] on the smartphone, then select [More...] to check that [NFC]

is enabled. (This is only necessary the first time.)

 Touch the smartphone to the camera.

 Canceling sleep and the screen lock of the

smartphone beforehand.

 Make sure that the

(N Mark) is displayed

on the screen of the camera.

 Continue touching without moving until

“PlayMemories Mobile” starts (1-2 seconds).

 Touch the N mark of the smartphone to

(N Mark) of the camera. If there is no N mark

on the smartphone, refer to the instruction

manual of the smartphone for the touch

area.

 When not well connectable by NFC, see

“Android/iOS not supporting NFC”.

iOS

 Select [Settings] on

the smartphone,

then select [Wi-Fi]

and select SSID

displayed on the

camera.

 Input the

password

displayed on the

camera (first time

only).

 Confirm

connection to the

SSID displayed on

the camera.

 Start

PlayMemories

Mobile.

DIRECT-xxxx:DSC-xxx

Android supporting NFC (One-touch sharing)

Android/iOS not supporting NFC

Android

 Start PlayMemories

Mobile.

 Select the SSID

displayed on the

camera.

 Input the

password

displayed on the

camera (first time

only).

 Playback an image to be sent

to the smartphone.

 MENU button  1 with   [Send

to Smartphone]  [Select on This

Device].

 Select [This Image] with /, then

press .

 The SSID and password are displayed, and

the camera is ready to be connected with

the smartphone.

SSID

Password

*Using One-touch functions (NFC), Android 4.0 ~

*One-touch functions (NFC) are not available

Advertising
This manual is related to the following products: