Sony KV-36FS17 - Manual (Page 41)

Using the Features
33
To change channels/programs in the PIP window
❑
Use the yellow PIP CH+/- button to scroll through the TV
channels.
❑ Use the yellow TV/VIDEO button to cycle through your other video
equipment connected to the TV, such as your VCR, DVD player
or Satellite Receiver.
Setups that affect your ability to use PIP
❑
Any video equipment you have connected to the AUX input
cannot be viewed in the PIP window.
❑ If you are viewing all channels through a cable box, the PIP
feature will not work. The cable box only unscrambles one signal
at a time, so the window picture will be the same as the main
picture.
❑ You can use PIP to see pictures from different sources on your TV.
For example, you can have a regular (CATV) channel and the
output from a VCR or DVD player or satellite receiver on screen
at the same time using PIP. To do this:
1 Connect the CATV cable to the UHF/VHF input on the back
of the TV.
2 Connect the peripheral (VCR or DVD player or satellite
receiver) to any of the VIDEO IN inputs on the the back of the
TV.
3 Tune to one image in the main picture.
4 Tune to a second image in the PIP window.
You can then SWAP the images on the TV screen.
✍
You cannot use a signal from the AUX connection with PIP.
Be sure to label your
video sources to make
them easier to find in the
Display. See “Video Label”
on page 47 for labeling
instructions.
z