Sony HT-7000DH - Manual (Page 67)

67 US
F:\Sony SEM HA\Revision3-
7000DH\JC06xxx_2662265122HT7000DH_US\2662265122\US06OTH_HT-7000DH-U.fm masterpage: Right
HT-7000DH
2-662-625-12 (2)
Other Oper
ations
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band and XM Radio
Index name of the input
a)
t Selected input
t Sound field currently applied
FM and AM band
Preset station name
a)
t Frequency t Sound
field currently applied
XM Radio
Channel name t Channel number t
Category name t Artist name/Feature t
Song/program title t Sound field currently
applied
a)
Index name appears only when you have assigned
one to the input or preset station (page 56, 66).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press ALT and then press SLEEP
repeatedly while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When Sleep Timer is being used, “SLEEP”
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press ALT and then press SLEEP. The
remaining time appears on the display. If you press
SLEEP again, the sleep timer will be canceled.
US01COV_HT-7000DH-U.book Page 67 Monday, August 14, 2006 9:22 AM