Sony BDV-N790W - Manual (Page 14)

14 US
Gettin
g
Star
ted
Step 1: Installing the
System
Install the system by referring to the illustration
below.
A Front speaker (L (left))
B Front speaker (R (right))
C Center speaker
D Surround speaker (L (left))
E Surround speaker (R (right))
F Subwoofer
G Unit
H Surround amplifier
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a specially
treated (waxed, oiled, polished, etc.) floor, as staining
or discoloration may result.
• Do not lean or hang on a speaker, as it may fall down.
• The speaker of this set is not anti-magnetic. This may
result in color unevenness when it is placed near a
CRT TV or projector.
• You can install the speakers on a wall. For details,
refer to the supplied “Speaker Installation Guide.”
Step 2: Connecting the
System
Do not connect the AC power cords (mains
leads) of the unit and surround amplifier to a
wall outlet (mains) until all the other
connections are made.
• When you connect another component with a volume
control, turn down the volume of the other
components to a level where sound is not distorted.
Connect the speaker cords to match the color of
the SPEAKERS jacks of the unit.
When connecting to the unit, insert the
connector until it clicks.
Getting Started
How to position the system
A B
D E
C
G
H
F
Connecting the speakers
FRONT R FRONT L CENTER SUBWOOFER
SPEAKERS
Green
(Center speaker)
Purple
(Subwoofer)
Red
(Front right speaker (R))
White
(Front left speaker (L))
To the unit