Sony XR-C400 - Manual (Page 10)

10
Actual total number: Sony XR-C400 ( E ) 3-810-309-11 (2)
EN
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
3 Repeat steps 1 and 2 to enter the
entire title.
3
To return to the normal CD playback
mode, press (LIST) for two seconds.
To erase a title
You can erase a title by selecting eight “_”s
(under-bar).
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the displayed items changes as
follows:
z Elapsed playback time z Disc title
Clock Z
Erasing the disc memo
1
Play the CD and press (LIST) for two
seconds.
2
Press (5) while pressing (SEL).
3
Press (+) or (–) to select the title that
you want to erase.
4
Press (SEL) for two seconds.
The title is erased.
Repeat step 3 and 4 if you want erase other
titles.
5
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
Selecting the specific
tracks for playback
— Bank
(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (LIST)
for two seconds. Then press (LIST)
momentarily.
Note
If you do not label the disc, you cannot use this
function. For more information on “Labelling a CD”,
refer to page 10.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (SEL).
The indication changes from “PLAY” to
“SKIP”. If you want to return to “PLAY”,
press (SEL) again.
3
Repeat step 2 to set the “PLAY” to
“SKIP” mode on all the tracks.
4
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
Notes
• You can set the “SKIP” mode on up to 24 track.
• You cannot set the “SKIP” mode on all the tracks.
CD1
SCHUBERT
CD1
CD1 DISC TRACK
CD1 DISC TRACK