Sony DSC-RX10 - Manual (Page 269)

Digital Still Camera
DSC-RX10
Viewing images on a “BRAVIA” Sync-compatible TV
By connecting this product to a TV that supports “BRAVIA” Sync using an HDMI cable (sold separately),
you can operate this product with the TV Remote Control.
1. Turn off both this product and the TV.
2. Connect the HDMI jack of the product to the HDMI jack of the TV using an HDMI cable (sold
separately).
3. Turn on the TV and switch the input.
4. Set the ON/OFF (Power) switch to ON.
5. MENU → (Setup) → [CTRL FOR HDMI] → [On].
6. Press the SYNC MENU button on the TV Remote Control, and select the desired mode.
Note
Only TVs that support “BRAVIA” Sync can provide SYNC MENU operations. For details, refer to the
operating instructions supplied with the TV.
If the product performs unwanted operations in response to the TV Remote Control when the product
is connected to another manufacturer’s TV using an HDMI connection, select MENU →
(Setup) →
[CTRL FOR HDMI] → [Off].
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
260