Sony DVP-NC615 - Manual (Page 60)

60
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
1
While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code (see the table
below).
2
Release TV [/1.
Checking the model name of your remote
The supplied remote commander is different
depending on the player model. Check the
model name of your remote (RMT-D143A or
RMT-D143E) so that you can input the
correct manufacturer’s code number to your
remote.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
◆For U.S./Canadian models (RMT-D143A)
◆For Asian/Oceanian models (RMT-D143E)
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Model
name
Manufacturer Code number
Sony (default) 01
JVC 09
Panasonic 19
Philips 21
RCA 10
Samsung 20
Sanyo 11
Sharp 18
Toshiba 07
Zenith 15
Manufacturer Code number
Sony (default) 01
JVC 33
LG 06
Panasonic 17, 49
Philips 06, 08
Samsung 23
Sharp 29
Toshiba 38