Inserting a battery – Sony PCG-GRX690P User Manual
Page 7
Inserting a battery
To insert a battery
1.
Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the
computer.
Opening the Battery Bay
2.
Slide the battery into the battery bay. If the computer is on, it automatically detects the battery.
Inserting a Battery
3.
Push the battery bay cover up until it clicks into place.
If the port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the
computer with the port replicator attached could cause a temporary loss of power.
Some software programs and peripheral devices prevent the system from activating Hibernate mode when the battery is
low or the computer is running on AC power. To avoid loss of data when using battery power, you should save your data
frequently and manually activate a power management mode, such as Standby or Hibernate. See
for more information.
Page 7