Sony FDR-AX100 - Manual (Page 39)

operation for about 2 minutes, to save battery power (Power Save).
How to Use Getting started Power source preparations
Charging the battery pack using the AC Adaptor
Charge the battery pack using the supplied AC Adaptor. Attach the battery pack in advance.
1. Close the LCD monitor.
When the viewfinder is pulled out, retract it.
2. Connect the AC Adaptor and the power cord (mains lead) to this product and a wall outlet
(wall socket).
The POWER/CHG (charge) lamp lights orange.
The POWER/CHG (charge) lamp turns off when the battery pack is fully charged.
Disconnect the AC Adaptor from the DC IN jack of this product.
A: AC Adaptor
B: Power cord (mains lead)
C: DC IN jack
D: Align the mark on the DC plug
Note
Be aware of the following notes on using the AC Adaptor.
27