Creating a blu-ray disc, Notes on use of the external media – Sony FDR-AX100 User Manual
Page 83
Creating a Blu-ray disc
You can create a Blu-ray disc with an AVCHD movie previously imported to a computer.
To create a Blu-ray disc, the “BD Add-on Software” must be installed.
Your computer must support the creation of Blu-ray discs.
BD-R (unrewritable) and BD-RE (rewritable) media are available for creating Blu-ray discs.
You cannot add contents to either type of disc after creating the disc.
To play back a Blu-ray disc that has been created with a movie that was recorded in [60p
Quality
] (models with the NTSC color system) / [50p Quality
] (models with the PAL
color system) image quality, you need a device that complies with the AVCHD Ver. 2.0
format.
You cannot save MP4 or XAVC S images onto a Blu-ray disc.
How to Use
Saving images with an external device
Saving images on an external media
device
Notes on use of the external media
Read the precautions when using external media.
Note
For this operation, you need the USB Adaptor Cable VMC-UAM2 (sold separately).
Connect the AC Adaptor to this product, and then connect the AC Adaptor to a wall outlet
(wall socket).
Refer to the instruction manual supplied with the external media device.
You may not be able to use external media devices with a code function.
The file systems this product recognizes are FAT/NTFS. To use an external media device
formatted with a file system that this product cannot recognize, format it on your computer,
etc. in advance. Before formatting, make sure that you have no important data saved on the
external media device as formatting will delete the data.
Operation is not guaranteed with all devices satisfying the operating requirements.
The number of scenes you can save on the external media device is as follows. However,
even if the external media device has free space, you cannot save scenes exceeding the
following number.
XAVC S movies: Max. 9,999
AVCHD movies: Max. 3,999
71