Sony PEG-NX70V - Manual (Page 61)

Exchanging and updating data using a HotSync
®
operation 61
Performing a HotSync
®
operation
Note
Do not remove your CLIÉ handheld from the cradle until the
HotSync
®
operation is complete as the Palm™ Desktop for CLIÉ
software may not be quit normally.
If the HotSync
®
operation does not start
Make sure that the HotSync icon is displayed in the
Windows task tray.
If the HotSync
icon is not displayed in the task tray, click
Start , Programs ( All Programs in Windows
®
XP), Sony
Handheld , and HotSync Manager . Check that the
HotSync icon is displayed in the task tray and press the
HotSync button on the cradle to start the HotSync
®
operation.
The message is displayed on your computer screen when the
HotSync
®
operation starts.
* From this point, when Windows XP Home Edition and Windows XP
Professional are common, they will both be referred to as Windows
XP.
Tip
When you cannot perform a HotSync
®
operation
Refer to “Troubleshooting Q&A.”