Sony PCG-GRV680 User Manual
Page 146
Advertising
To install a memory module
1.
Remove the new memory module from its packaging, and install the memory module by sliding it into the open
slot at a 45-degree angle. See
Installing a New Mem ory Module
2.
Push the module down until it snaps into place.
3.
When the module is correctly seated, close the memory bay.
4.
Replace the fastening screw(s) on the memory bay.
5.
Make sure the system recognizes the new memory module. See
Confirming added memory capacity
information.
Page 146
Advertising