ATTO Technology 1500D/E - Manual (Page 29)

20
Configuration & Management: ExpressNAV
iSCSI Configuration
Configurable options are
• iSCSI Alias
• iSCSI Port Number
• iSNSLoginControl
• iSNSServer
• CHAP settings: account name and secret
• CHAP direction (in, out)
See iSCSI commands on page 37 for details on
each parameter.
Bridge Configuration
Configurable options are
• User name and current password
• Old
Password
• New Password
• Confirm Password
• Bridge name
• Identify Bridge
• Restore Defaults
See Maintenance commands on page 29 for
details on each parameter.
Mapping
While the iPBridge maps devices automatically at
startup by default, you may change mapping
using the ExpressNAV Mapping page. See
Mapping devices on page 43 and Mapping
commands on page 39 for details.
Advanced CLI Configuration
Allows you to input any CLI command available
through the iPBridge.
To use the Advanced Configuration page
1 Type in the CLI command
2 Click the Submit button: this is equivalent to
typing in the CLI command into a Telnet or
serial port CLI session.
A text field beneath the box will list the most
recent commands issued to the iPBridge
through this page.
If you enter an incorrect parameter, the CLI
help text will be displayed, showing the
parameters available.
3 If you are using a “set” command and the entry
was correct, type
saveconfiguration restart to
make the changes persistent or click the
Submit button to implement changes
immediately.
Restart Firmware
Implements a firmware restart of the bridge and
makes permanent any changes you have made
since the last firmware restart.
Note
Restarting the firmware may take a few
minutes.
1 Click the Restart button.
A box will tell you to wait until the counter gets
to 0 and then the browser will refresh.
2 If the browser does not refresh after the counter
gets to 0, click the link to refresh it manually.
Help
Gives help information about the command line
interface commands and troubleshooting tips via
links to pages with help text for each category of
options and one link to the Troubleshooting Tips
and FAQs page on the ATTO website,
www.attotech.com.
Contact information for ATTO technical support
is on the right.
Help is always available by pressing any word
shown in red on the screen.