Sony PCV-RZ20CGP - Manual (Page 53)

Rem ov ing the driv e holder (PCV- RX series m odel)
8. Slide the new drive into the drive holder and align the holes on each side of the drive bay.
9. Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
Attaching the driv e screws
Your new hard disk drive is supplied with the necessary screws. Do not overtighten these screws when securing
the drive to the drive holder.
10. Align the drive holder with the tracks on the inside of the chassis. Slide the drive holder in completely.
11. Push down on the drive holder tab to lock the drive into position.
Page 53