Sony PCG-GRX560K - Manual (Page 73)

Connecting an External Display
73
To change the display when connecting an external computer
display or projector
When you connect an external display to the VGA (Monitor) port, you can
toggle the output between the Liquid Crystal Display (LCD), the external
monitor, or both devices.
Use the Fn+F7 key combination to select the display you want. See “Selecting
the Display Mode” for more information.
✍
See the manual that came with your projector for more information on its installation
and use.
To Press Result
Switch to an
external display Fn+F7 Toggles between the LCD, the external display
connected to the Monitor port, or both the LCD
and external display.
✍
Connect the external display to the notebook or port replicator before you turn on the
unit, otherwise the Fn+F7 key combination will not work.
Only LCD LCD and external display
Only external display