Sony DCR-PC115 - Manual (Page 135)

135
“Memory Stick” Operations
Using the search function, you can automatically take in only still images from tapes
and record them on a “Memory Stick” in sequence.
Before operation
•Insert a recorded tape into your camcorder and rewind the tape.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press MENU, then select and decide upon PHOTO SAVE in
with the
control button (p. 96).
PHOTO BUTTON appears on the screen.
(3) Press PHOTO deeper. The still image from the tape is recorded on a “Memory
Stick.” The number of still images copied is displayed. END is displayed when
copying is completed.
To stop copying
Press MENU.
When the memory of the “Memory Stick” is full
MEMORY FULL appears on the screen, and the copying stops. Insert another “Memory
Stick” and repeat the procedure from step 2.
Image size of still images
Image size is automatically set to 640
×
480.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. As well do not turn the power off, eject a
“Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may
occur.
If the write-protect tab on the “Memory Stick” is set to LOCK
NOT READY appears when you select the item in the menu settings.
When you change “Memory Stick”s in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick.”
Copying still images from a tape
– Photo save
3
2
PHOTO
SAV I NG
0
[ ME NU ] : E ND
P HO T O S A V E
4 / 1 5
0:0 0:0 0:0 0
END
4
[ ME NU ] : E ND
P HO T O S A V E
8 / 1 5
0:3 0:0 0:0 0
PHOTO BUTTON
[ P HO T O ] : S T A R T [ ME NU ] : E ND
P HO T O S A V E
4 / 1 5
0:0 0:0 0:0 0 MEMOR Y S E T
S T I L L S E T
MO V I E S E T
P R I N T MA R K
P RO T E C T
R E A D Y P HO T O S A V E
R E T U R N
[ ME NU ] : E ND
640 STD 640 STD
640 STD
MENU