Sony PCV-MXS10 - Manual (Page 13)

To Set Up Your Computer
13
Connecting the stereo speakers
Your computer system is supplied with speaker wires (2) to connect the stereo
speakers to the terminals on the system unit. At the ends of each speaker wire are
two wire leads, one with black-line color-coding to identify the proper
compatibility with the speaker terminals on the system unit.
To connect the speaker wires to the computer
1 Press and hold the black tab on the lower left-side speaker terminal, located
on your computer’s back panel.
2 Insert the black-line lead into the lower left-side speaker terminal on the
computer. Release the black tab and gently pull on the speaker wire to set the
lead firmly.
3 Press and hold the red tab on the upper left-side speaker terminal, located on
your computer’s back panel.
Connecting the speakers to the computer
IN
LINE
OUT
DVI
SPEAKER
VHF/UHF
-----
EO
Black-line
color coding