Sony KDE-50XBR950 - Manual (Page 36)

34
Setup
Notes on Using This Connection
Do not leave the display indication of the cable box and VCR
turned on.
S VIDEO
VIDEO
Y
P B
P R
L
R
Y
P B
P R
L
AUDIO
R
AUDIO
L
R
L
R
AUDIO
~ AC IN DVI–HDTV
R - AUDIO - L
DVI–HDTV IN
i.LINK
(TS/DV/MICROMV)
VIDEO IN 3 6
4
1 AUDIO OUT
(VAR/FIX)
CONTROL S
SUB WOOFER
OUT
(VAR)
HD/DVD IN
(1080i/720p/480p/480i)
OUT
IN
OPTICAL OUT
DISPLAY SIGNAL OUT
WHITE BLACK
CABLE
VHF/UHF 5
S400
Rear of Media receiver unit
VCR
CATV
cable
Coaxial cable
(not supplied)
Antenna cable
(supplied)
Splitter
(not supplied)
Cable box
Coaxial cable
(not supplied)
CATV cable
A/V cable
To Do This ... Do This ...
Watch cable (unscrambled)
channels Press TV/VIDEO repeatedly to select the cable input (CABLE in the illustration).
Watch cable box (scrambled)
channels Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
or 4). Press
TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration). Use the cable box to change channels.
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration).
Set up the TV remote control to
operate the cable box or VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on page 52.
Activate the remote control to
operate the cable box or VCR For the cable box, press FUNCTION repeatedly until the SAT/CABLE indicator
lights up. For the VCR, press FUNCTION repeatedly until the DVD/VCR indicator
lights up.
Control specific cable box and
VCR functions with the TV
remote control See “Operating a Cable Box” on page 56 and “Operating a VCR or D-VHS” on page
55.
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 109.