Sony DSC-TX9 - Manual (Page 103)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
103 GB
Protect
Protects recorded images against accidental erasure.
The
mark is displayed for registered images.
1 Press the (Playback) button to switch to
playback mode.
2 t (Protect) t desired mode
• When using internal memory, a Folder View is used with still images and movies displayed in the same
folder.
• When [Display Burst Group] is set to [Display Main Image Only], only the main image in the burst group
is protected. If you want to protect all images, set [Display Burst Group] to [Display All] first, then apply
the protection.
(This Image) Protects the currently displayed image in single-image mode.
(Multiple
Images)
You can select and protect multiple images.
After step 2, perform the following.
1 Select an image to be protected, then touch it.
Repeat the above steps until there are no more images to be
protected.
Touch an image with a
mark again to release the mark.
2 Touch [OK] t [OK].
(Set All on This
Date)
Protects all images in the date range or folder, or all AVCHD
movies.
Touch [OK] after step 2.
(Set All in This
Folder)
(Set All AVCHD
files)
(Remove All on
This Date)
Unlocks all images in the date range or folder, or all AVCHD
movies.
Touch [OK] after step 2.
(Remove All in
This Folder)
(Remove All
AVCHD files)
Notes