Sony FST-ZUX9 - Manual (Page 26)

26 GB
To resume playback from the point
you stop the track
– Resume Play
This system memorizes the point where
you stopped the playback. So you can
resume playback from that point.
1
While playing a track, press x to
stop playback.
“Resume” appears in the display.
2
Press NX (or N on the remote).
The system starts playback from the
point you stopped in step 1.
Resume Play is not cancelled even if you
change the funtion except
– you change to TUNER function when
CD/USB power manage is set to OFF.
To remove the USB device
1
Press x to stop playback.
2
Check that the REC/ERASE
indicator on the unit is light off.
3
Press "/1 to turn off the system.
4
Remove the USB device.
Other operations
Notes
• The following situations can increase the time
it takes to start playback:
– the folder structure is complex.
– the memory capacity is excessive.
• When the USB device is connected, the
system reads all the tracks on the USB device.
If there are many folders or tracks on the USB
device, it may take a long time to finish
reading the USB device.
• Do not connect the system and the USB
device through a USB hub.
• Depending on the previous operation you
have performed with the USB device, the
operation time for the USB device may vary.
• If the system is turned off or a power failure
occurs during “RESUME”, then you turn on
the system and start playback, the system will
start playback from the beginning of the track
where you stopped playback.
• This system does not necessarily support all
the functions provided in a connected USB
device.
• The playback order for the system may differ
from the playback order of the connected
digital music player.
• Be sure to turn off the system before removing
the USB device. Removing the USB device
while the system is turned on may corrupt the
data on the USB device.
• You are recommended not to save other types
of tracks or unnecessary folders on a USB
device that has MP3 audio tracks.
To Do this
Stop playback Press x .
To cancel resume
playback, press
x
twice. “RESUME”
disappears from the
display.
Pause playback Press NX (or X on the
remote).
To resume playback,
press NX
(or X on the
remote) again.
Select the next or
previous folder Press +/–.
Select the next or
previous track Press . or >.
To Do this
Search for a track
on an USB device
by its folder name
and track name and
start playback the
track. (TRACK
SEARCH) 1 Turn OPERATION
DIAL to select the
folder you want, then
press ENTER.
2 Turn OPERATION
DIAL to select the
track you want, then
press ENTER.
To return to the parent
folder, press RETURN.
Find a point in a
track Hold down m or M
on the remote during
playback, then release it
at the point you want.