ADTRAN NT1 T400 - Manual (Page 10)

61212016L1-1 NT1 T400 User Manual 1
1.0 GENERAL
1.01 Unit Overview
The ADTRAN NT1 Type 400 provides a basic rate interface be-
tween the customer’s ISDN Terminal Equipment (TE) and the
ISDN Network. Two interfaces are provided for this purpose: con-
nection to the ISDN network is made by the “U” interface and
connection to the customer's ISDN TE is made by the S/T inter-
face.
The NT1 Type 400 is available in two configurations:
• The NT1 Type 400 Standalone with an internal power supply,
Part No. 1212.016L1.
• The NT1 Type 400 Circuit Pack, Part No. 1212.010.
The ADTRAN NT1 Type 400 Standalone consists of two parts, a
metal housing containing the power supply, connectors, and the
NT1 Type 400 Circuit Pack. The Circuit Pack can be removed from
the housing by removing the plastic front panel and sliding the
unit out of the housing. This allows access to the option switches
which may be reset by the customer. The NT1 Type 400 Circuit
Pack can also be purchased as a separate unit and mounted in a
Type 400 NCTE rack, as indicated in APPENDIX A.
LED Indicators
Table 1 describes the status of the LEDs located on the front panel
of the NT1 Type 400. There is a READY and ERROR indicator for
each port of the NT1 Type 400.
Table 1: NT1 Type 400 Front Panel Indicators
If an ERROR indicator is illuminated, check the flash rate of the
READY indicator to determine the source of the error. A faster 8
Hz flash rate (8 flashes per second) indicates a network problem.
A slower 1 Hz rate (1 flash per second) indicates an S/T interface
problem.
LED Color Description
READY Green S/T and U interfaces ready
to place call
ERROR Red S/T or U interface not ready
POWER Green Unit has power